<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="https://www.peertechzpublications.org/assets/xsl/oaitohtml.xsl"?>
<OAI-PMH xmlns="http://www.openarchives.org/OAI/2.0/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:mml="http://www.w3.org/1998/Math/MathML" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/ http://www.openarchives.org/OAI/2.0/OAI-PMH.xsd">
										<responseDate>2026-05-13T16:07:30Z</responseDate>
										<request verb="GetRecord" metadataPrefix="oai_dc" identifier="oai:www.peertechzpublications.org:10.17352/2455-488X.000083">https://www.peertechzpublications.org/oai-pmh</request><GetRecord><record>
								<header>
									<identifier>oai:www.peertechzpublications.org:10.17352/2455-488X.000083</identifier>
									<datestamp>2024-07-23</datestamp>
									<setSpec>PTZ.JCEES:VOL10</setSpec>
								</header>
								<metadata>
									<oai_dc:dc xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:oai_dc="http://www.openarchives.org/OAI/2.0/oai_dc/" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:mml="http://www.w3.org/1998/Math/MathML" xsi:schemaLocation="http://www.openarchives.org/OAI/2.0/oai_dc/ http://www.openarchives.org/OAI/2.0/oai_dc.xsd">
										<dc:title>
										Enhancing Mechanical Properties of Aluminium-Based Biocomposites through the Addition of Hybrid Reinforcing Particulates
										</dc:title><dc:creator>Chukwuneke JL</dc:creator><dc:creator> Olisakwe HC</dc:creator><dc:creator>Nnakwo KC</dc:creator><dc:description>&lt;p&gt;This study looks into the improvement of mechanical properties in Al-7Mg-2Si-0.1Nb-based biocomposites by incorporating hybrid additions of Irvingia Wombolu Shell Particulates (IWSP) and Mangifera indica shell particulates (MISP). The biocomposites were created using the stir-casting technique. Tensile, hardness, and impact strength were used to determine the mechanical properties of the developed biocomposites. The study shows that the additions of IWSP and MISp have a significant impact on the biocomposites’ properties. The addition of hybrid 2wt% IWSP and 10wt% MISP resulted in a higher percentage elongation compared to the base alloy. The ultimate tensile strength of the biocomposites increased significantly with the addition of both IWSP and MISP, peaking at 6wt% IWSP and 6 wt% MISP. The hybrids of IWSP and MISP consistently demonstrated higher tensile strength, reaching a maximum ultimate tensile strength of 132 MPa. The hardness properties of the biocomposites improved with the addition of IWSP and MISP, with the highest values observed in hybrid combinations of 6 wt% IWSP and 6 wt% MISP. Specifically, the addition of 6wt% IWSP and 6wt% MISP resulted in a remarkable 34.9% increase in hardness. The study found that adding IWSP and MISP significantly improved the impact strength of the Al-7wt%Mg-2wt%Si-0.1wt%Nb alloy matrix, with a maximum value of 45 J at a hybrid 6 wt% IWSP and 6 wt% MISP. These findings demonstrate the ability of hybrid additions to improve the mechanical properties of Al-7Mg-2Si-0.1Nb-based biocomposites, making them a promising candidate for a variety of engineering applications.&lt;/p&gt;</dc:description>
										<dc:publisher>Journal of Civil Engineering and Environmental Sciences - Peertechz Publications</dc:publisher>
										<dc:date>2024-07-23</dc:date>
										<dc:type>Research Article</dc:type>
										<dc:identifier>https://doi.org/10.17352/2455-488X.000083</dc:identifier>
										<dc:language>en</dc:language>
										<dc:rights>Copyright © Chukwuneke JL et al.</dc:rights>
									</oai_dc:dc>
								</metadata>
							</record></GetRecord>
						</OAI-PMH>
